- Posts: 7
- Thank you received: 0
pipe support location practice
- shishirmtech
- Topic Author
- Offline
- New Member
Less More
10 years 4 months ago - 10 years 4 months ago #8368 by shishirmtech
pipe support location practice was created by shishirmtech
For a piping checker ,how to confirm the support location for non critical line ,which stress group does not review. How do a checker will fix the anchor point specially for vertical lines.Sometimes checker give loops in vertical lines .
If you have any link for support location practice please share.
If you have any link for support location practice please share.
Please Log in or Create an account to join the conversation.
- Jop
- Offline
- Moderator
Less More
- Posts: 1053
- Thank you received: 14
10 years 4 months ago - 10 years 4 months ago #6970 by Jop
Do it once and Do it Right
Replied by Jop on topic Re: pipe support location practice
Read this:
pipingdesigners.com/Training%20- ... %202c1.htm
and this]pipingdesigners.com/training%20- ... n%203a.htm[/url]
and this]pipingdesigners.com/training%20- ... n%203b.htm[/url]
then this]pipingdesigners.com/Training%20- ... on%204.htm[/url]
pipingdesigners.com/Training%20- ... %202c1.htm
and this]pipingdesigners.com/training%20- ... n%203a.htm[/url]
and this]pipingdesigners.com/training%20- ... n%203b.htm[/url]
then this]pipingdesigners.com/Training%20- ... on%204.htm[/url]
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
- mtvalla
- Offline
- New Member
Less More
- Posts: 8
- Thank you received: 0
10 years 4 months ago - 10 years 4 months ago #6986 by mtvalla
Replied by mtvalla on topic Re: pipe support location practice
Hi,
I may be shooting from the hip here, but even if non critical, stress would normally be required to do a visual analysis to confirm anchor locations. Piping checker would check piping is supported to meet pipe support spans.
Hope this helps
I may be shooting from the hip here, but even if non critical, stress would normally be required to do a visual analysis to confirm anchor locations. Piping checker would check piping is supported to meet pipe support spans.
Hope this helps
Please Log in or Create an account to join the conversation.
- RVS
- Offline
- New Member
Less More
- Posts: 4
- Thank you received: 0
8 years 5 months ago #9051 by RVS
Replied by RVS on topic Re: pipe support location practice
Mr. Jop. I want to read the mentioned links. but its show error on the page. please arrange
Please Log in or Create an account to join the conversation.
- Anton
- Offline
- Administrator
8 years 5 months ago #9052 by Anton
- If you're the smartest person in the room ... you're in the wrong room.
Replied by Anton on topic Re: pipe support location practice
RSV,
The links are old and date back to a precious version of the site.
However, the content is still there.
Take a look at all there articles here:
pipingdesigners.com/contents/tips-tools-...tion-9-pipe-supports
and browse through all the other topics in the "Contents" tab at the top of the page.
The links are old and date back to a precious version of the site.
However, the content is still there.
Take a look at all there articles here:
pipingdesigners.com/contents/tips-tools-...tion-9-pipe-supports
and browse through all the other topics in the "Contents" tab at the top of the page.
- If you're the smartest person in the room ... you're in the wrong room.
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.213 seconds