- Posts: 2
- Thank you received: 0
Curved Tee Fitting
- b1r1a1d1
- Topic Author
- Offline
- New Member
Less More
7 years 2 months ago #9226 by b1r1a1d1
brad landry
Curved Tee Fitting was created by b1r1a1d1
Can anyone tell me what kind of fitting this is? It's being used in Holland in a food and beverage application. I need to find out what it is so I can purchase them and include in my model. I do know it's Sch 10 304 SS. I'm wondering if it was made from two 90's?
Thanks,
Brad
Thanks,
Brad
brad landry
Please Log in or Create an account to join the conversation.
- aj63
- Offline
- New Member
Less More
- Posts: 3
- Thank you received: 0
7 years 2 months ago #9227 by aj63
Replied by aj63 on topic Curved Tee Fitting
Hi Brad
I believe it is called an elbow tee.
See the link below -
www.traderscity.com/board/products-1/off...a-bpe-bs4825-101431/
I believe it is called an elbow tee.
See the link below -
www.traderscity.com/board/products-1/off...a-bpe-bs4825-101431/
Please Log in or Create an account to join the conversation.
- b1r1a1d1
- Topic Author
- Offline
- New Member
Less More
- Posts: 2
- Thank you received: 0
7 years 2 months ago #9228 by b1r1a1d1
brad landry
Replied by b1r1a1d1 on topic Curved Tee Fitting
Thanks AJ63, I did see that when I searched but couldn't find any that were 8" butt welded. I have a call in to the Dutch pipe designer whose using it. He'll be able to tell me. I'll post an update.
brad landry
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.190 seconds