Entering into pipe designing......

It would really help if you had a portfolio to show at the interview. This could just be a mock up of a tank, vessel, and a pair of pumps. Pipe it throwing in some instrumentation, valves etc. Dimension it up, Plot it off. Also do iso's of the lines you've shown just to demonstrate what you know. Nobody interviewing you will expect it to be perfect but what it will do is show how keen you are. If you want someone from here to do a quick review of it prior to your interview you can PM me and I'll throw my eye over it for you.
Good luck.
J

J Thanks for taking the time to reply.

Would I need piping sofware to do this or should I just use autoCAD 2007 which I've got. When you say mock up do I need to produce plans and elevations and then produce iso's from these?

Autocad would be fine. Yes, Produce a piping General arrangement with plans and sections. It only needs to be simple and based on equipment from you own imagination. If you have drawings of pumps or vessels so much the better. there are probably drawings of actual pumps that you can download fron the internet.

Thanks J, I'll put something together and PM you with it if that's OK.

J

I've PM'd you regarding the drawings I've done but I don't know how to attach them so you can have a look at them before tomorrows interview.

you have a pm