- Posts: 44
- Thank you received: 0
BOSSES
- sabir
- Topic Author
- Offline
- Senior Member
Less More
16 years 6 months ago - 16 years 6 months ago #7184 by sabir
BOSSES was created by sabir
What is "BOSSES FOR CONNECTIONS" with reference to Flanges...?
Regards
Sabir
Regards
Sabir
Please Log in or Create an account to join the conversation.
- Jop
- Offline
- Moderator
Less More
- Posts: 1053
- Thank you received: 14
16 years 6 months ago - 16 years 6 months ago #4202 by Jop
Do it once and Do it Right
Replied by Jop on topic Look here: http://www.orionvalves.com/specialfeatures.pdf On page 3 you
Look here:
www.orionvalves.com/specialfeatures.pdf
On page 3 you will see small circles on the sides of the valve bodies. These are "Bosses" for connections of drains, bleeds, bypasses, etc..
And here]www.mastewart.com/pdf/BF-CSValves.pdf[/url]
The photograph on page 1 shows the boss locations.
www.orionvalves.com/specialfeatures.pdf
On page 3 you will see small circles on the sides of the valve bodies. These are "Bosses" for connections of drains, bleeds, bypasses, etc..
And here]www.mastewart.com/pdf/BF-CSValves.pdf[/url]
The photograph on page 1 shows the boss locations.
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
- sabir
- Topic Author
- Offline
- Senior Member
Less More
- Posts: 44
- Thank you received: 0
16 years 6 months ago - 16 years 6 months ago #4204 by sabir
Replied by sabir on topic Thanks Mr. Jop
Thanks Mr. Jop
Please Log in or Create an account to join the conversation.
- Buggernuts
- Visitor
16 years 6 months ago - 16 years 6 months ago #4206 by Buggernuts
Replied by Buggernuts on topic I really dont mean to
I really dont mean to be critical here, as everyone has to start in this business at some point, and I freely admit to not (recently) having done a vast amount of Piping Design, having been in 3D CAD Admin (PDS and PDMS, MicroStation Trainer) for as long as I can remember (PDMS 9.4, PDS V4 on Clipper), before that 4 year Apprenticeship back in 1971, but some of the postings and lack of basic knowledge of "Senior Pipers' and Piping Engg" (What is an Engg anyway, I always thought it was Eng.) really scares the crap out of me!!!!!!
Why have none (or I get the impression that none) of these Senior Pipers have had no formal training whatsoever?????
Heres a question for the PDS Experts out there. What is the reason for having Views Grouped in 1 and 5,6,7,8 on the dual screens and not 1,2,3,4 across dual screens??
First correct answer wins a gobstopper!!!
Why have none (or I get the impression that none) of these Senior Pipers have had no formal training whatsoever?????
Heres a question for the PDS Experts out there. What is the reason for having Views Grouped in 1 and 5,6,7,8 on the dual screens and not 1,2,3,4 across dual screens??
First correct answer wins a gobstopper!!!
Please Log in or Create an account to join the conversation.
- Buggernuts
- Visitor
16 years 6 months ago - 16 years 6 months ago #4207 by Buggernuts
Replied by Buggernuts on topic And what do you have
Please Log in or Create an account to join the conversation.
- Anton
- Offline
- Administrator
16 years 6 months ago - 16 years 6 months ago #4208 by Anton
- If you're the smartest person in the room ... you're in the wrong room.
Replied by Anton on topic That's just based on the
That's just based on the ammount of posts made .... no other relevance .... must change that, as it is quite misleading!
- If you're the smartest person in the room ... you're in the wrong room.
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.256 seconds