- Posts: 4
- Thank you received: 0
45 deg Branch connection for flare header
- sumeetd83
-
Topic Author - Offline
- New Member
-
Less More
14 years 1 week ago - 14 years 1 week ago #7820 by sumeetd83
45 deg Branch connection for flare header was created by sumeetd83
For Flare line at 3.5 kg/cm2 and 250 deg cel.Which type of 45 deg branch connection should be used ?
Latrolet or Y type fitting.Can one use stub connection
Latrolet or Y type fitting.Can one use stub connection
Please Log in or Create an account to join the conversation.
- Jop
-
- Offline
- Moderator
-
Less More
- Posts: 1053
- Thank you received: 14
14 years 1 week ago - 14 years 1 week ago #5629 by Jop
Do it once and Do it Right
Replied by Jop on topic Re: 45 deg Branch connection for flare header
Without you giving us specific sizes I assume you are asking a general question, so for a general answer I would say use the LatroLet.
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.201 seconds
