- Posts: 3
- Thank you received: 0
Dual plate wafer check valve
- dcongvt
- Topic Author
- Offline
- New Member
Less More
13 years 6 months ago - 13 years 6 months ago #7933 by dcongvt
Dual plate wafer check valve was created by dcongvt
Dear all!
I know if you want to have a specific cracking pressure (the pressure to open the valve) of wafer check valve, you must state it when ordering. But, Is there any standard (API, MSS-SP-...,) for cracking pressure?
Thanks all!
I know if you want to have a specific cracking pressure (the pressure to open the valve) of wafer check valve, you must state it when ordering. But, Is there any standard (API, MSS-SP-...,) for cracking pressure?
Thanks all!
Please Log in or Create an account to join the conversation.
- Bhaveshkh
- Offline
- New Member
Less More
- Posts: 4
- Thank you received: 0
13 years 5 months ago - 13 years 5 months ago #5837 by Bhaveshkh
Replied by Bhaveshkh on topic Re: Dual plate wafer check valve
The cracking pressure generally varies form one manufacturer to another. We generally ask the manufacturers before buying the valves if there is any restriction.
For check valve vendors you visit on www.oilandgasproducts.com
Regards
Bhavesh
For check valve vendors you visit on www.oilandgasproducts.com
Regards
Bhavesh
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.254 seconds