HAMMER UNION

  • V.D.DEODHAR
  • V.D.DEODHAR's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
15 years 2 days ago - 15 years 2 days ago #7524 by V.D.DEODHAR
HAMMER UNION was created by V.D.DEODHAR

DAER SIR,

CAN ANYBODY TELL ME WHICH IS/ARE STANDARD/S AVILABLE FOR HAMMER UNION ? WHERE I WILL GET THEM. I WANT DEVELOP HAMMER UNION.

THANK YOU.
V.D.DEODHAR.

Please Log in or Create an account to join the conversation.

More
15 years 1 day ago - 15 years 1 day ago #5064 by Jop
Replied by Jop on topic Re: HAMMER UNION
"Hammer" Line Blinds
Available brands from Tyco Flow Control:
www.tycovalves-eu.com/products_r ... Blinds&m=1
Suitable for a rapid blinding of pipes for plant security, safety of personnel and product segregation. Wide selection of models available depending on application, with a choice of weld or flanged ends, and body, plate and seal materials to suit service conditions. Suitable for "spreading" or rigid pipelines.

* Fully rated to ANSI 150 and 300 Limited Sizes ANSI 600
* Carbon Steel ASTM A216 WCB
* Stainless Steel ASTM A351 CF8M
* Plate Material to suit application
* Seal Material: Buna N, Viton, PTFE, 316/Spiral Wound
* Sizes:
o 1-30 inches
o 25-750 mm





Also ask these people:
Shree Timurti Technologists pvt. ltd.

hammer blinds, gate/ globe/ check/ butterfly valves, fasteners, flanges, pipe fittings, sluice gates of all types of ratings, valve accessories hammer blinds, gate/ globe/ check/ butterfly valves, fa ...

Products/Services : pipe fittings, ratings, g, valves,...

Address:75, udyognagar society, b/h ayurvedic college, outsie panigate, vadodara 390019 ,gujarat ,india
City :vadodara Country :india

Phone: 91-265-2564285/2570093 Fax:
Website:http://www.trademart.in/shreee6540.htm

Do it once and Do it Right

Please Log in or Create an account to join the conversation.

More
11 years 2 months ago - 11 years 2 months ago #6753 by 11echo
Replied by 11echo on topic Re: HAMMER UNION
I'm sure this is probably WAY too late, but I want to offer a different answer then my colleague Mr JOP. There are "Hamer" line blinds (as pointed out by JOP), these are used to quickly isolate lines, probably for maintenance or service. You can get a pretty good idea of these at this link:
www.thraco.com/hamer/main.htm
However working in the oil field we have a "Hammer Union" which is basically just a standard union, but with 3 lugs on the collar so you can use a hammer to tighten these up to point that is tighter then what you could by using a wrench. These are shown on the following site:
www.asse.org/practicespecialties ... 0Alert.pdf

Please Log in or Create an account to join the conversation.

More
11 years 2 months ago - 11 years 2 months ago #6750 by Jop
Replied by Jop on topic Re: HAMMER UNION
Sometimes language and the pronunciation of words is confusing.

This one is pronounced "hay-mer"
www.thraco.com/hamer/main.htm

This one is pronounced "hamm-er"
www.asse.org/practicespecialties ... 0Alert.pdf

Do it once and Do it Right

Please Log in or Create an account to join the conversation.

More
8 years 11 months ago #8942 by 11echo
Replied by 11echo on topic Hammer Union - PIC
FYI - This is way late, but they say a picture is a 1000 words! This is a hammer union, they are normally used in "off-plot" areas, that is because thy require abit of room to be able to get at that and deal with the "lugs".

Attachments:

Please Log in or Create an account to join the conversation.

Moderators: Jop
Time to create page: 0.226 seconds