Welcome, Guest
Username: Password: Remember me

TOPIC: Branch connections not showing in isometrics

Branch connections not showing in isometrics 4 years 1 month ago #9032

  • Piper1978
  • Piper1978's Avatar
  • Offline
  • New Member
  • Posts: 2
  • Karma: 0
Hi all!
1. I use Cadworx 2013 R2 and when I extract isometrics branch connections are not shown but only in material take off box. Does anyone knows how to show the description of the B.C. with an arrow?
I tried to find it through Project Manager application (Cadworx application) and edit the option file but I couldnt!

2. How can I insert orifice flanges?

Thanks!
Last Edit: 4 years 1 month ago by Piper1978.

Branch connections not showing in isometrics 4 years 1 month ago #9034

  • shayzee
  • shayzee's Avatar
  • Offline
  • New Member
  • Posts: 3
  • Thank you received: 2
  • Karma: 0
Hi,
This is down to how the
component is set up in your library parts. It all comes from here if set up correct with the piping rules set up etc.
See attached iso generated in Cadworx of what you are after. Unfortunately you will just need to draw an arrow with the description manually until you get your library component set up correct. The same applies with the orifice flange.
Attachments:
The following user(s) said Thank You: Piper1978
Time to create page: 0.507 seconds

 

 

Latest Jobs Feed

Feed not found.

Company News Feeds

Company News Feeds

Login Form

You are not logged in.

Search

}());