Welcome, Guest
Username: Password: Remember me

TOPIC: Hanger support from pipe rack

8 years 2 months ago #8027

  • chintantank
  • chintantank's Avatar
  • Offline
  • New Member
  • Posts: 3
  • Karma: 0
Hi guys,

I am working on construction of the power plant in western Australia. I have come across an issue and looking for guidance from an expert.

Problem: There is ACW piping (2 X 2") running between two HRSG (pipe run is approx. 8.5 m) at the elevation of 6m above the FGL. I want to support these pipes with hanger support from an existing pipe rack(which is 8.1m bottom of structure from FGL). This is high rated cyclone area (on average 4 to 5 category B cyclones per year). so is it feasible to support the pipe from two HRSG at the end and in between through hangers from pipe rack?

Regards.

Re: Hanger support from pipe rack 8 years 2 months ago #6220

  • Jop
  • Jop's Avatar
  • Offline
  • Moderator
  • Posts: 1052
  • Thank you received: 14
  • Karma: 11
chintantank,

You might want to ask yourself a few questions and if you get the right answers then you can proceed.

1. What is in these 2-2" lines and will losing them or having them out of service for a long period of time or during a storm cause any real harm?

2. If I don't support these two lines from the pipe rack how else will I support them?
Do it once and Do it Right
Moderators: Jop
Time to create page: 0.418 seconds

 

 

Latest Jobs Feed

Feed not found.

Login Form

You are not logged in.

Search

}());