Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Pipe Hangers

Pipe Hangers 4 years 4 days ago #9045

  • Jop
  • Jop's Avatar
  • Offline
  • Moderator
  • Posts: 1052
  • Thank you received: 14
  • Karma: 11
The true minimum length of any Hanger is governed by the Hardware selection.
This would include:
Element A - the top attachment element (there are many choices)
Element B - the intermediate element (normally plain or fully threaded rod)
Element C - the lower pipe attachment element (there are many choices)

If the Element C is an under pipe roller support then the pipe will allow required movement during the temperature swings. (example: ardware&biw=1024&bih=609&tbm=isch&tbo=u&source=univ&sa=X&ved=0CFUQsARqFQoTCLfg2Oe678cCFYgdHgodl2UAxA#imgrc=2kIeYDHpwx431M%3A

Go here for other examples:
Do it once and Do it Right
  • Page:
  • 1
  • 2
Moderators: Jop
Time to create page: 0.379 seconds



Latest Jobs Feed

Feed not found.

Company News Feeds

Company News Feeds

Login Form

You are not logged in.