Section - 15E: MTOs, BOMs & BOQs

  • Anton
  • Anton's Avatar Topic Author
  • Offline
  • Administrator
  • Administrator
More
10 years 2 months ago #8906 by Anton
Section - 15E: MTOs, BOMs & BOQs was created by Anton
 
MTO, BOM & BOQ –
What’s the difference, and when are...

Section - 15E: MTOs, BOMs & BOQs

- If you're the smartest person in the room ... you're in the wrong room.

Please Log in or Create an account to join the conversation.

More
9 years 1 week ago #8907 by danish85
Replied by danish85 on topic Section - 15E: MTOs, BOMs & BOQs
Thanks Anton but is it not the secondary MTO that becomes BOQ, the moment a RFQ is issued & MTO calculated by client becomes the BOQ for contractors.

Please Log in or Create an account to join the conversation.

More
8 years 3 months ago #9058 by kurtvana19
Replied by kurtvana19 on topic Section - 15E: MTOs, BOMs & BOQs
Nice article..it is crystal clear.
good job

I am to stay

Please Log in or Create an account to join the conversation.

More
7 years 7 months ago #9171 by knives
Replied by knives on topic Section - 15E: MTOs, BOMs & BOQs
Thanks Mr. Anton. If you wont mind, could you also provide details on industry norms for the BOQ measurements. I know that it varies from one EPC contractor to another due to construction culture differences but it is very interesting to know how the quantities are presented in BOQs. For example, the pressure test work volume would be prepared and generally quantified in cu.m but others would prefer it on linear meter length per size, pipe support in no. of pcs instead of tonnage, Radiographic test in terms of no. of films instead of quantity of joint per size, etc.

Please Log in or Create an account to join the conversation.

Moderators: Jop
Time to create page: 0.194 seconds